Monel K-500 Alloy K-500 alloy steel plate alloy steel bar alloy steel pipe alloy steel wire

Product Description

The alloy k-500 is a nickel-copper alloy that combines the excellent corrosion resistance of alloy 400 with greater strength and hardness.The alloy k-500 provides three times higher yield strength than the alloy 400.These enhanced properties are mainly obtained by adding aluminum and titanium elements to nickel as the main elements and by aging hardening.During the aging hardening process, a small amount of Ni3(titanium, aluminum) particles were precipitated into the matrix.The k-500's low permeability, high strength and good corrosion resistance have been widely used, mainly in oil well detection equipment and electronic parts.An important property is that the k-500 is nonmagnetic even at very low temperatures.Aging hardening will produce initial volume shrinkage.In the aging hardening process, the round rod with diameter of 2.5 x 10-4 in is shrunk.For optimal performance, the typical aging hardening process is described belowAt 982 ° C for 30 minutes and then water quenched annealing.At 593 ° C to 607 ° C to keep 16 hours later with the slow cooling furnace 9.4 ° C - 3.8 ° C per hour up to 482 ° C.After cooling to room temperature from 482 ° C, it may take some boiler cooling, air cooling or quenching, without considering the cooling rate.

Monel400 is a kind of corrosion resistant alloy with the largest amount, the widest application and excellent comprehensive performance.This alloy has excellent corrosion resistance in hydrofluoric acid and fluorine gas medium, and also has excellent corrosion resistance to hot concentrated alkali solution.It is also resistant to corrosion of neutral solution, water, seawater, atmosphere and organic compounds.An important feature of the alloy is that it generally does not produce stress corrosion cracks and has good cutting performance.

MONEL k-500 alloy has the same corrosion resistance as 400, but has higher mechanical strength and hardness.
Good resistance to heat and corrosion and long-term stability of microstructure.
Mainly used in the manufacture of aircraft engine working temperature below 750 ℃ on the turbine blade and gas turbine blades;Used for making fasteners and springs on ships;Pumps on chemical equipment

Chemical Composition

Mechanical capacity

supply of products

Product show

Haosteel, with stainless steel as its main business, manufactures premium stainless steel products with high technologies and a high added value and fosters four major product categories, namely stainless steel bars, stainless steel pipes, stainless steel plates, stainless steel wires, now the Carbon steel, Alloy steel, Aluminium and Cooper are also in our service range. Haosteel take the responsibilities of devoting ourselves to providing valuable products and services, all clients can enjoy the one-stop service from Haosteel.

Through our worldwide marketing network, these premium products not only satisfy the demand on the domestic market but are also exported to Asia, Africa, Europe and America, extensively applied to the industries such as automobile, household appliances, petrochemical, machinery, energy, transportation,metalwork, aeronautics and astronautics, nuclear power and electronic instruments. Its market share is about 20% in domestic and 80% in the international market.

Looking into the future, all the employees of Haosteel will take the responsibilities of devoting ourselves to providing valuable products and services to our customers with cutting-edge capabilities of stainless steel manufacturing, looking forward sincerely to cooperating with clients to seek co-development and to realize common brilliance.